You agree to get information about new jobs for this search by email. You can cancel email alerts at any time. Pierce Equipment: When smaller openings, like round or square holes, are required in a panel, a die punch is used (mounted in a die retainer, which is in turn mounted to a closing die surface). These hardened steel punches can be sharpened so that a single punch can survive the entire stamping procedure, sometimes tens of thousands of strokes. Pierce equipment normally refers to the male punch, the female die button, and the mounting retainers.
We have no power to the fuel pump wire at the tank, and have not been able to find a fuel pump relay although retrofit repair information shows that there is a fuel pump relay, but does not specify location. C1 Pin 19 at the ECM shows to be Fuel Pump Relay Control and C1 Pin 6 shows to be Fuel Pump Relay Return. Underhood power control center does not show any of the relays to be a ‘Fuel Pump Relay’.
The battery is the first part connected when first starting your vehicle. The battery must crank 100-200 amps in order to turn the … Read more